奇瑞飞行汽车试飞成功,无方向盘还能无人驾驶!
2024 年10月18日，在 2024 奇瑞全球创新大会上，奇瑞展示了一款三体式复合翼飞行汽车，并宣布该款飞行汽车已成功试飞。以下是关于这款飞行汽车的一些详细信息。On October 18, 2024, at the Chery Global Innovation Conference 2024, Chery showcased a three body compound wing flying car and announced that the flying car had successfully flown. Here are some detailed information about this flying car.
1. 设计结构：这款飞行汽车由三个主要部分组成，分别是下方的行驶模块、中间的座舱模块和上方的飞行模块。机翼采用了复合翼设计，既有传统固定翼，也有类似直升机的旋翼。这种设计使得飞行汽车能够在日常使用中灵活转换形态，只需在机场安装飞行模块即可飞行，飞机起飞后会自动断开与行驶模块的连接，降落后可重新连接。
2. 驾驶模式：取消了方向盘、油门等传统控制装置，支持飞行及行驶两种模式的无人驾驶，可实现陆空无人驾驶模式切换。由于飞机是无人驾驶状态，主要由地面站工作人员开启，无需乘客操控飞机，乘客还可以通过座舱中控台处的显示屏与地面工作人员沟通，实时获取飞机的相关情况，确保安全性。
3. 性能参数：飞行高度在 1000 米以下，最大飞行速度可达 120km/h，飞行时间约 40 分钟，主要用于城区短途通勤，可减轻交通压力。
1. Design structure: This flying car consists of three main parts, namely the lower driving module, the middle cabin module, and the upper flying module. The wing adopts a composite wing design, which includes both traditional fixed wings and helicopter like rotors. This design allows flying cars to flexibly transform their form in daily use, simply installing a flight module at the airport to fly. After takeoff, the aircraft will automatically disconnect from the driving module and reconnect after landing.
2. Driving mode: Traditional control devices such as steering wheel and throttle have been eliminated, supporting unmanned driving in both flight and driving modes, and enabling switching between land and air unmanned driving modes. Due to the unmanned state of the aircraft, it is mainly operated by ground station staff, without the need for passengers to control the aircraft. Passengers can also communicate with ground staff through the display screen in the cockpit center console to obtain real-time information about the aircraft and ensure safety.
3. Performance parameters: The flight altitude is below 1000 meters, the maximum flight speed can reach 120 km/h, and the flight time is about 40 minutes. It is mainly used for short distance commuting in urban areas and can reduce traffic pressure.
目前该飞行汽车仍处于原型机阶段。接下来，奇瑞将围绕一些极限工况进一步开展对应的性能测试，测试完成之后将开始适航认证，为服务更广泛的公众做准备。
At present, the flying car is still in the prototype stage. Next, Chery will further conduct corresponding performance tests around some extreme working conditions. After the tests are completed, airworthiness certification will begin to prepare for serving a wider range of the public.（文编译/飞行汽车 feiauto）
微信最新改版
没有“星标”和“在看”
会找不到我们的动态
快把“飞行汽车网”设个星标
页:
[1]