奇瑞三体复合翼飞行汽车 原型机成功试飞

bellyoungsmile

    2024年10月18日，在2024奇瑞全球创新大会上，奇瑞展示了一款三体式复合翼飞行汽车，该汽车已成功试飞。这款飞行汽车是原型机，目前正在研发中。





    On October 18, 2024, at the Chery Global Innovation Conference 2024, Chery showcased a three body compound wing flying car, which has successfully undergone test flights. This flying car is a prototype and is currently under development.



    该车采用三体式复合翼设计，由飞行器、智能座舱和智能底盘三部分构成。三体之间采用超紧凑对接技术，可以垂直起降、自主结合分离。其取消了传统的方向盘和油门等操作设备，支持飞行及行驶两种模式的无人驾驶，并能实现陆空无人驾驶模式切换。其飞行高度在1000m以下，最大飞行速度可达120km/h，飞行时间约40分钟，主要用于城区短途通勤。图文来源网络，内容仅供学习参考，无商业用途。



    The car adopts a three body composite wing design, consisting of an aircraft, an intelligent cockpit, and an intelligent chassis. The three bodies adopt ultra compact docking technology, which can vertically take off and land, and autonomously combine and separate. It eliminates traditional operating devices such as steering wheel and throttle, supports unmanned driving in both flight and driving modes, and can switch between land and air unmanned driving modes. Its flight altitude is below 1000m, the maximum flight speed can reach 120km/h, and the flight time is about 40 minutes. It is mainly used for short distance commuting in urban areas. The text and images are sourced from the internet, and the content is for learning reference only, with no commercial use.（文编译/飞行汽车 feiauto）
微信最新改版

没有“星标”和“在看”

会找不到我们的动态

快把“飞行汽车网”设个星标